Mechanized tacking and welding with Kemppi's MicroTack

See how MasterTig's MicroTack offers fast and accurate tacking with minimum heat input in both DC and AC TIG welding. It's ideal for multiple, repetitive tacking on thin sheet applications, where a consistent and controlled appearance is paramount. MicroTack can be set between 1 to 5 repeat pulse cycles or continuous cycle mode. The welding current level is set according to application and the arc cycle time selected between 1 to 200 ms. In this video, you'll see mechanized tacking and welding (welding only for pipes with no requirement of full penetration weld). o Base material: stainless steel 316L pipe, wall thickness 1,5 mm o Joint type: Butt weld, air gap 0 mm o Welding position: PA o Travel speed (tack welding): 1440 mm/min o Travel speed (welding): 240 mm/min o Torch angle: 0 degrees o The distance of electrode: 1,0 mm o Electrode: 1,6 mm grey o Electrode stick-out: 4 mm o Electrode grind angle: 55 degrees o Shielding gas: Argon 5 l/min o Backing gas: No backing gas (because not welded through) Explore the MasterTig: https://www.kemppi.com/en-US/offering/discover/mastertig/